Wiedenmann Flex Cut RMR 230 H Скачать руководство пользователя | Manualshive

Страница: 22 / 55

background image

Flex Cut RMR 230 H

3 Safety notes

22

846 99 01 - 003

05 | 2021

3.7

Safety routines

3.7.1

Shutting down and securing the machine

WARNING!

Risk of injury due to movements of the machine or machine parts!

➢

Shut down and secure the machine before leaving the operator's seat!

To shut down and secure the machine:

➢

Shut down the drive and wait until any parts with overrun have come to a complete stop.

➢

Shut down the machine, remove the ignition key and take it with you.

➢

Secure the machine to prevent it from rolling away. (parking brake).

3.7.2

Securing the raised machine and machine parts to prevent them from descending

WARNING!

Risk of injury due to the machine or machine parts descending!

➢

Prior to performing any work below a raised machine or raised machine parts, secure the respective
machine or machine parts and prevent them from descending using a rigid safety prop or hydraulic
locking device (e.g. stop valve) and suitable supports.

To securely support the machine or machine parts:

➢

Only use suitable and adequately dimensioned materials as supports.

➢

Car jacks are not suitable for supporting the machine or machine parts and therefore must not be used for this
purpose.

3.8

Safety mark on the machine

Safety stickers on the machine offer warnings against hazards in
danger areas and are an important component of the machine's
safety equipment. Missing safety stickers increase the risk of
serious or even fatal personal injuries.

➢

Clean soiled safety stickers.

➢

Check all safety stickers after all cleaning work to
ensure that they are still complete and easily legible.

➢

Immediately replace any missing, damaged or illegible
safety stickers. (replacement safety stickers are
available from your dealer)

«
...
20
21
22
23
24
...
»

Содержание Flex Cut RMR 230 H
























































Отзывы:

Нет отзывов

Похожие инструкции для Flex Cut RMR 230 H

Бренд: Ryobi Страницы: 8

Бренд: Qualcast Страницы: 20

Бренд: Viking Страницы: 149

Бренд: Southern States Страницы: 36

EARTHWISE 60318

Бренд: ALM Страницы: 64

Бренд: Pottinger Страницы: 43

Бренд: Yazoo/Kees Страницы: 72

Бренд: Yard Machines Страницы: 28

Бренд: Exmark Страницы: 4

Бренд: Jonsered Страницы: 47

Бренд: Hitachi Страницы: 25

Бренд: Hitachi Страницы: 100

Бренд: Hitachi Страницы: 160

Бренд: Craftsman Страницы: 240

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды