BlueGate 2100
Command Line Entry
July 26, 2001
WIDCOMM, Inc, Proprietary and Confidential
26
8.5 CONFIG
Displays the active configuration of BlueGate 2100.
There are no parameters associated with this command.
8.6 CONSTANTPIN
Sets the fixed PIN Code to be used by all Bluetooth devices attempting to access
BlueGate 2100. The PIN Code can be up to 16 alphanumeric characters long.
Default value: “” (blank field, not defined).
Format:
CONSTANTPIN = ASCII string
•
ASCII string
is the actual PIN Code.
Example:
CONSTANTPIN = 2A33
NOTE: Do not use
CONSTANTPIN
if the connecting device does not support security.
8.7 DEVICEIPADDR
Sets the IP address range for Bluetooth Devices if DHCP is disabled.
Default values:
•
Range number: “” (blank field, no entry).
•
Number of IP addresses: “” (blank field, no entry).
•
IP address: “0.0.0.0” (blank field, not defined).
Format:
DEVICEIPADDR = n,cnt,aa.bb.cc.dd
•
n
is the range number: range1, range 2, or range 3.
•
cnt
is the number of IP addresses.
•
aa.bb.cc.dd
is the starting IP address in dotted decimal notation.
Example:
DEVICEIPADDR = 1,3,192.168.0.1
generates a pool of three IP addresses
(192.168.0.1, 192.168.0.2, and 192.168.0.3) in range one on BlueGate 2100.
8.8 DEVICENAME
Sets the user-friendly device name of BlueGate 2100. The device name helps identify
BlueGate 2100 to other devices; the name can be up to 100 alphanumeric characters
in length.
Default value: the letters “BG” plus the unit’s serial number (NNNNNN), for example,
“BG9123.”
Format:
DEVICENAME = ASCII string
•
ASCII string
is the actual user-friendly name of the device.
Example:
DEVICENAME = My BlueGate Network Access Point