PG :1 / 1
AFTER A FEW DAYS OF ASSEMBLY, IT WILL HAVE ACCLIMATIZED TO THE ENVIRONMENT. PLEASE TIGHTEN ALL HARDWARE.
NOTE:
STEP 4
STEP 1
QTY
HARDWARE LIST
NO
QTY
PART LIST
NO
ASSEMBLY INSTRUCTION
CHECK TIGHTNESS OF ALL SCREWS EVERY 6-8 WEEKS.
BACK REST
HB&FB
1pc
2pcs
1
2
B
1pc
C
D
STEP 2
1pc
3
A
JCBC SCREW
1pc
E
4pcs
M6 x 35mm
JCBB SCREW
8pcs
M8 x 20mm
SCREW
8pcs
M4 x 32mm
JCBC SCREW
4pcs
M6 x 50mm
SPRING WASHER
FLAT WASHER
4pcs
4pcs
F
G
H
STEP 3
1pc
4
2pcs
5
SLAT
7pcs
4pcs
6
LEG
1
3
4
01-JAN-16
MODEL : Frank Day Bed - HB,FB+SR
E F
D
H
2
M4 x 65mm
L - KEY
M5 x 65mm
FRONT RAIL
BACK RAIL
L - KEY
C H
6
Begin assembly by attaching each Leg (6) to the bottom
of the HB&FB (1) securing with 2 Allen Bolt (C) per panel.
B G
Attach the Front Rail (3) and Back Rail (4) to the HB&FB (1)
aligning holes and securing with 2 Allen Bolts (B) per each end.
(DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
Attach the Back Rest (2) to the back of each HB&FB (1) by aligning the hole and securing with 2 Allen Bolt (D), 2 Spring Washer (E), 2 Flat Washer (F)
from the back side per each end. (DO NOT FULLY TIGHTEN BOLTS FOR THIS STEP)
5
A
Your new day bed is now complete
Tighten all bolts from STEP 2 using the Allen Wrench (G) that has been provided.
Now only tighten bolts for STEP 3 using Allen Wrench (H).
Attach Slat (5) to Front Rail (3) and Back Rail (4) by unrolling and securing with 4 Wood Screws (A)
2 per each side.Tighten all screws using philips head screwdriver (not included)
