Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS
:
1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assemble.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provider).
MODEL : BBT 1050 TALLBOY
ASSEMBLY INSTRUCTIONS
HARDWARE LIST
ITEM
DESCRIPTION
QTY
1
5/16" Hex Nut
4 PCS
2
M8 Flat Washer
4 PCS
3
M8 Spring Washer
4 PCS
4
Spanner (13mm)
1 PC
PART LIST
ITEM
DESCRIPTION
QTY
A
LEGS
4 PCS
B
HANDLE
5 PCS
C
HANDLE SCREW
10 PCS
D
FLAT WASHER
10 PCS
E
DRAWER
5 PCS
F
TALLBOY
1 PC
x 4
Inverse the night stand as picture
shown and assemble the leg.
STEP 1
Step1.1
Step1.2
Take Out Bottom Drawer
INSIDE
OUTSIDE
B
D
C
E
Put the bottom drawer into frame
STEP 2
1 OF 2
