Whittier Wood Furniture 1162RLNa Скачать руководство пользователя страница 1

 

P.O. Box 2827 
Eugene, OR 97402 USA

 

Production Code: 
 
 
 
 
 

VN 

03/22 

 

Model # 

1162RLNa 

Bryce 5 Drawer 
Chest

 

RLN = Ridgeline finish 
Assembly Instructions 

 

IMPORTANT NOTES: 

 

Wood can be susceptible to changing color over time when exposed to 

strong sunlight. Use window shades, drapes or blinds to protect your 
furniture. To help the surface age evenly and avoid dark and light 
spots, periodically move items to expose the entire surface to an even 
amount of light so it may develop a uniform patina. 

 

For normal household use only. 

Not

 recommended for commercial use. 

 

Do not climb, sit or stand on this piece of furniture. 

 

Do not overload the drawers. 

 

Unload items before you move this unit. 

 

This assembly requires two people.

 

 

WARNING

 

Children have died from furniture tipover. To reduce the risk of 
furniture tipover: 

 

ALWAYS install tipover restraint provided. 

 

NEVER put a TV on this product. 

 

NEVER allow children to stand, climb or hang on drawers, 
doors or shelves. 

 

NEVER open more than one drawer at a time. 

 

DO NOT defeat or remove the drawer interlock system. 

 

Place heaviest items in the lowest drawers. 

Use of tipover restraints may only reduce, but not eliminate, 
the risk of tip over. 

Attention

: Attached to the bottom of or included with this unit is a tipping 

restraint kit. When you receive your furniture, be sure to find and install 
the tipping restraint as instructed in the kit. If you cannot locate the 
restraint, please contact us immediately for replacement. 

Drilling, sawing, sanding or machining wood products can expose you to 
wood dust, a substance known to the state of California to cause cancer. 
Avoid  inhaling  wood  dust  or  use  a  dust  mask  or  other  safeguards  for 
personal protection.

 

For more information go to: www.p65warnings.ca.gov/wood

 

This  product  can  expose  you  to  chemicals,  including  formaldehyde, 
which are known to the State of California to cause cancer.

 

For more information go to: www.p65warnings.ca.gov/furniture 
 

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

 CUSTOMER SERVICE

 

If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a 
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you 
cannot order replacement parts through your dealer, please contact our customer service department. 

Hours:

 Our friendly customer service staff can be reached: 

Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time)

You may leave a message 24 hours a day, seven days a week. 

Customer Service: 

800-653-

3336 • 

Outside the U.S.: 

541-687-0213 

 

Fax:

 541-687-

2060• 

Email:

 [email protected]

 

 

Thank you for allowing us to help you furnish your 
home. We are certain you will be delighted with 
your new furniture for many years to come.  

 

Содержание 1162RLNa









Отзывы: