background image

0  Spectra Assembly Guide 

 

Owner Registration 

How to Access – To access Information / Configure press MENU twice in 
succession.  Arrow down to Owner Registration and press ENTER.  To Exit 
squeeze and release trigger on hand grip twice

Owner Registration – Allows the Spectra owner to embed their name and 
contact information, protected from tampering, but updateable with original 
factory code.

 

•  Select Owner Register and press ENTER.  Press MENU / TAB to select 

Register and press ENTER.   

•  Password – IMPORTANT! Write down the password or code that 

automatically appears and keep it in a safe place separate from your Spectra… 
(Password code will disappear, and must be manual re-entered, after first 
registration).  If you normally keep your instruction manual at home, write it on 
the inside cover of the manual.  Should you ever change addresses or sell your 
Spectra, this code must be retained and manually re-entered to update or revise 
your Spectras registration information.  To detour theft, without this original 
disappearing code, significant inconvenience can be expected regarding re-
setting the Registration information.   

Owner’s Name – Use the ARROWs Down / Up, and Left / Right to spell out your 
name.  Or press ENTER to bring up a key-board and then use ARROWs and 
ENTER to spell out your name.

Содержание V3


















Отзывы: