Whitecroft Lighting Limited
Burlington Street, Ashton-under-Lyne, Lancashire OL7 0AX
Tel44 (0)161 330 6811 Facsimile: +44 (0)161 331 5855
Registered No. 3848973 England Registered Office: As above
December 2021 - Rev 1
MSU Surface and
Radial AL
PK-NPD158-IL
GENERAL INFORMATION
1) A qualified electrician, in accordance with IEE wiring regulations should carry out
connection to mains wiring.
2) Oberve ESD precautions during installation.
3) Ensure that the rated voltage and frequency requirements are compatible with the
available mains supply.
4) Cleaning of reflectors and lenses should be carried out using clean, soft and lint
free cloths and anti-static cleaning fluid
5) Do not carry out high voltage insulation test, i.e. 500/1000v this may damage
internal components.
6) The light source within the luminiare shall only be replaced by the manufacturer, or
similar qualified person.
7) Batteries must be replaced by a qualified electrician when they do not meet the
rated duration.
Installation Instruction
TECHNICAL SUPPORT
Telephone: 0161 330 6811
Email: [email protected]
http://whitecroftlighting.com/
DIMENSIONS
SPECIFICATION
Lamp type
LED
Finish
RAL 9003(White)
Materials
Polycarbonate / Mild Steel
Weight
Standard Fitting = Radial 11.5kg Surface 10.8kg
Emin Fitting
= Radial 11.8kg Surface 11.1kg
Supply
220-240V AC, 50/60Hz
Output
2200lm / 3400lm
Operating temp
0-30C
v
Connection
1.5mm
²
input terminal block
Ingress protection
IP54
MSU Surface
MSU Radial AL
