White Outdoor ZTT-1850 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 48

White Outdoor ZTT-1850 Скачать руководство пользователя страница 1

Lawn Tractor Models

ZTT-1850
ZTT-2150

Operator’s Manual

PRINTED IN U.S.A.

IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

WHITE OUTDOOR PRODUCTS COMPANY P.O. BOX 361131 CLEVELAND, OHIO 44136-9722

Warning:

This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-

covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required
by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark
arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131
Cleveland, Ohio 44136-9722.

FORM NO. 770-10475.fm

(10/2000)

1
2
3
...
»

Содержание ZTT-1850

















































Отзывы:

Нет отзывов