White Outdoor Smart Speed 565 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 24

White Outdoor Smart Speed 565 Скачать руководство пользователя страница 1

Mulching Mower

Model 565

PRINTED IN U.S.A.

FORM NO.

769-01537.fm

(11/2004)

IMPORTANT:

Read safety rules and instructions carefully before operating equipment.

Warning:

This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-cov-

ered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable
local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State
of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws.
Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer
or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Operator’s Manual

1
2
3
...
»

Содержание Smart Speed 565

























Отзывы:

Нет отзывов