manualshive.com logo in svg

White Outdoor 430 Series, Руководство оператора

Поделиться
Скачать
White Outdoor 430 Series Скачать руководство пользователя страница 1

IMPORTANT: 

Read safety rules and instructions carefully before operating equipment.

21” Rear & Side Discharge 

Mulching Lawn Mower

Model Series 430

PRINTED IN U.S.A.

Warning: 

This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-

covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting            
applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. 
In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have 
similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized 
service dealer or contact the service department, P.O. Box 361131 Cleveland, Ohio 44136-0019.

MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019

Operator’s Manual

FORM NO. 769-01446.fm

(10/21/2004)

Содержание 430 Series





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды