background image

2

Finding and Recording Model Number

Table of Contents

BEFORE YOU START ASSEMBLING  
YOUR NEW EQUIPMENT, 
please locate the model plate on the equipment 

and copy the information to the sample model plate provided 
to the right. You can locate the model plate by standing at 
the operating position and looking down at the rear of the 
snow thrower. This information will be necessary to use the 
manufacturer’s web site and/or obtain assistance from the 
Customer Support Department or an authorized service 
dealer.

This Operator’s Manual is an important part of your new snow thrower. It will help you assemble,  

prepare and maintain the unit for best performance. Please read and understand what it says. 

  Safety Labels .............................................. p. 3
  Safe Operation Practices ........................... p. 4
  Setting Up Your Snow Thrower .................. p. 6
  Know Your Snow Thrower .......................... p. 7
  Operating Your Snow Thrower ................... p. 8
  Adjustments & Maintenance ................... p. 10

  Off-Season Storage .................................. p. 12
  Troubleshooting ........................................ p. 13
  Parts List ................................................... p. 14
  Accessories & Kits ................................... p. 17
  Notes .......................................................... p. 18
  Warranty ........................................ Back Cover

DEALER LOCATOR PHONE NUMBER: 800-949-4483

MTD  LLC

P. O. BOX  361131

CLEVELAND,OH 44136

www.whiteoutdoor.com

Engine Information

The engine manufacturer is responsible for all engine-related issues with regards to performance, power-rating, 
specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed 
separately with your unit for more information.

Calling Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance 
of this unit, please call the Customer Dealer Referral Line. 
Call 1-(800)-949-4483 to reach the Customer Dealer Referral Line. Please have your unit’s model number and serial 

number ready when you call. See previous section to locate this information. You will be asked to enter the serial number in order 
to process your call.

Engine 

Manual

STOP

For more details about your unit, visit our website at www.whiteoutdoor.com               

Содержание 235





















Отзывы: