30411-0-0612
Page 31
INSTALLING OPTIONAL BRICK LINER
1. Remove screen assembly from fireplace.
2. Remove logs from burner assembly.
3. Insert rear brick liner and two side brick liners onto bottom
of the inner casing. Align grout lines on rear brick liner with
grout lines on side brick liners. You must insert rear brick liner
before inserting the two side brick liners.
4. Install one "Z" shaped brick liner bracket
5. Install one "L" shaped brick liner bracket at the bottom of
each side brick liner as illustrated.
NOTE: Discard the long brick liner mounting brackets not
used.
6. Replace logs into burner assembly. Refer to appropriate
Installation Instructions and Owner's Manual.
7. Attach screen assembly to fireplace.
8. Installation of optional brick liner is completed.
VPP1A-22 For Unvented Gas Fireplace
OPTIONAL BRICK LINER INSTALLATION INSTRUCTIONS
Figure 24
Index
Number
Part
Number Description
1
21642
BRICK LINER BRACKET - UPPER (2
REQUIRED)*
2
R6498
BRICK PANEL - REAR*
3
R6497
BRICK PANEL SIDE - LEFT*
4
R6499
BRICK PANEL SIDE - RIGHT*
5
19401
BRICK LINER BRACKET -LOWER (2
REQUIRED)*
1
2
3
4
5
5
1
