manualshive.com logo in svg

WHISPER KOOL Quantum SS12000, Руководство пользователя, Страница: 9 / 40

Поделиться
Скачать
WHISPER KOOL Quantum SS12000 Скачать руководство пользователя страница 9

www.whisperkool.com | Page 7

Receiving and Inspecting the System 

• 

Lift only at the designated hand hold locations on the shipping container or fully support the unit from 

underneath. A shipment may include one or more boxes containing accessories. 

• 

Inspect the packaging for any obvious signs of damage or mishandling before opening the container. 

• 

Note any discrepancies or visual damage on the Bill of Lading before signing. 

• 

Place the box containing the unit on a tabletop to prepare it for testing prior to installing. 

• 

Sit unit upright for 24 hours. 

Note: WhisperKOOL units are manufactured in the USA and tested prior to shipment. 

Review the Packing Slip to Verify Contents

• 

Check the model number to ensure it is correct. 

• 

Check that all factory options ordered are listed. 

If any items listed on the packing slip do not match your order information,

contact WhisperKOOL Customer Service immediately. 

Check the Evaporator Unit (Fan Coil Unit) Box for the Following Contents: 

RECEIVING & INSPECTING THE SYSTEM

Please leave the unit in its original box until you are ready for installation. This will allow you to move the product 

safely without damaging it. When you are ready to remove the product from the box, refer to the installation 

instructions. 

TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit. 

• 

Quantum Evaporator Unit

• 

External Drip Pan

Accessory Kit#1: 

• 

(1) Quantum Owner’s Manual

• 

(1) Split System Warranty Checklist

• 

(1) 50’ Bottle Probe

• 

(6) Vibration Isolators

• 

(1) Float Switch

• 

(1) Set of Drain Fittings

Accessory Kit#2: 

• 

(1) Remote Keypad

• 

(1) 50’ Keypad Connection Cable

• 

(1) Remote Box

• 

(1) 1/2” Connector Squeeze

• 

(8) #8-18 x 1 3/4” Slotted Hex Head Screws

Accessory Kit#3: 

• 

(1) 1/4” Sight Glass

• 

(1) 1/4” Filter Drier

Check the Condenser Box for the following contents: 

• 

Quantum SS9000 Condensing Unit or Quantum SS12000 Condensing Unit depending  

on unit ordered.

Содержание Quantum SS12000









































Отзывы:

Нет отзывов