Страница 1: ......
Страница 2: ...DB1 does not supply the proper amplifier load required by most tube type amplifiers Do not use a tube amplifier s speaker output alone with the EDB1 You must also have a speaker or appropriate dummy load connected to avoid possible damage to the amplifier OUT Loop thru from the input for connecting to an amplifier or powered monitor This product is warranted to be free of defects in materials or w...
Страница 3: ...ts will operate properly when set to the 0 position Set to the 20dB position for use with very hot instrument signals Set to 40 or when connecting to the speaker output of an amplifier GND LIFT Disconnects the ground between the input and the XLR output when set to the LIFT position to help eliminate hum Ground remains connected when set to the GND position This product is warranted to be free of ...
