Whirlpool WWI206, Руководство по обслуживанию

Страница: 2 / 17

2
1.Precautions
When performing trouble-shorting and part replacement during service operation, be sure to
note the following precautions for safety reasons.
1-1.Safety Precautions
1-1-1.Do not use Non-genuine parts
The components of this washing machine have safety-features such as non-combustibility and voltage
withstanding. Therefore, always use the same parts when replacing parts. In particular, be sure to use
only designated parts in case of major safety parts identified by the marking.
1-1-2.Be sure that the washer is grounded
Connect the grounding wire to the shell plate, and lay it into earth of over 25cm in depth or ground it
to the power receptacle equipped with ground terminal.
* Never ground it to the telephone line , lightning rod or gas pipe.
1-1-3. Servicing precautions
After servicing , check to see that the screws, parts, and wiring are installed in their original
Positions, and check the installation between the external metals and the stock plug. In addition, place
The washing machine in a level position to prevent vibration and noise during operation.
1-1-4.Precautions in operation
* During spinning , don’t put your hand in the spin basket. Because the spin basket is roating at high
speed, roating parts may injure your hand.
* Put your laundry into the washer evenly. Because uneven laundry may cause noise or vibration.
* Before washing, check all pockets. If nails or pins remain in pockets, they may damage the washer or
clothes.
* Don’t press the control panel with a sharp object.
* Don’t use excessively hot water.