8
EMPTY WATER TANK AFTER EACH DRYING CYCLE
Hold the handle and carefully pull out the water tank. Hold the full
water tank with both hands.
Empty the water and insert the container by pushing it back into
place. Make sure that it is properly inserted.
CLEAN DOOR FILTER AFTER EACH DRYING CYCLE
Open the door and remove the door filter by pulling it upwards.
Press the button to open the door filter. Remove the lint inside.
Close the filter and reinsert it in the right direction, so that it
completely integrates in the filter chamber.
CLEAN THE BOTTOM FILTER ABOUT EVERY THREE MONTHS
Open the bottom flap. Turn the locking bars right and left on the
bottom filter downwards in horizontal position. Hold the bottom
filter on the handle and pull it out.
Clean the bottom filter under running water; wipe away dust and
lint.
Clean the filter chamber of the dryer with a damp cloth or carefully
with a vacuum cleaner. Insert the bottom filter again. Turn the
locking bars upwards in vertical position. Close the bottom flap.
CARE AND MAINTENANCE
Switch off and unplug the
dryer before doing any
cleaning and maintenance.
Caution, the water in the
water tank can still be hot.
WARNING
EN
400010765167
Whirlpool is a registered trademark of Whirlpool, USA
001
n
MAINTENANCE AND CLEANING
AND TROUBLESHOOTING
Refer to the
Use and Care Guide.
The
Use and Care Guide
can be obtained as
follows:
• After-Sales Service; using the phone number in
the warranty booklet
• Download from the Whirlpool website
http://docs.whirlpool.eu
CONTACTING AFTER-SALES SERVICE
Provide both numbers shown on the service sticker inside the door
when contacting the After-Sales Service team.
http://www.whirlpool.eu
The phone number can be found in the warranty booklet.
