Whirlpool W11390949A, Инструкция по эксплуатации

Страница: 1 / 16

1
IIC CE E M MA AK KE ER R D DO OO OR R R RE EV VE ER RS SA AL L IIN NS ST TR RU UC CT TIIO ON NS S
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power to ice maker
Unplug ice maker or disconnect power.
WARNING
Crush Hazard
Articulated hinges are self closing and many pinch points
exist prior to cabinet installation.
Do not remove hinge covers until product is ready to be
installed.
Failure to follow these instructions can result in crush, cut,
or pinch injuries.
2. Remove hinge cover screws
Remove the screws attaching top and bottom hinge covers using a
3/16ʺ hex driver.
A. Hinge cover
3. Remove hinge covers
Using pliers, remove the hinge covers from the top and bottom
hinges.
NOTE: Save the hinge covers for future use. Reinstall the hinge
covers if product is removed from cabinet installation.
4. Lay down ice maker
Lay down the ice maker as shown in the illustration. Be sure to
cover the floor with cardboard or hardboard to avoid damaging
the floor.
5. Remove stainless steel panel screws
Remove the screws holding the stainless steel panel from the
bottom of the door. Set the stainless steel panel and screws
aside. For custom panel model, remove the screws and the top
metal bracket using the Phillips screwdriver. Set the screws and
bracket aside.