Whirlpool W10038100 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 8

Whirlpool W10038100 Скачать руководство пользователя страница 1

WASHER INSTALLATION INSTRUCTIONS

WASHER SAFETY

W10038100

Table of Contents

WASHER SAFETY............................................ 1

INSTALLATION REQUIREMENTS ................. 2

Tools and Parts ............................................. 2
Location Requirements................................. 2
Drain System................................................. 3
Electrical Requirements ................................ 3

INSTALLATION INSTRUCTIONS ................... 4

Before You Start............................................ 4
Remove Shipping Materials.......................... 4
Connect Drain Hose...................................... 5
Connect the Inlet Hoses ............................... 6
Secure the Drain Hose .................................. 7
Level the Washer........................................... 7
Complete Installation .................................... 8

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

1
2
3
...
»

Содержание W10038100









Отзывы:

Нет отзывов