Страница 1: ...rews 4 from the microwave cabinet sides at locations as indicated 3 Install Ducts D4 and DlO by m attaching Existing Strew 4 and using No 10 Strews 2 as shown 4 Position Duct D6 over microwave covering rear exhaust vent Loosely attach Duct using No 12 Strews 2 as shown 5 Lii the front of Duct D6 and peel backing off double sided tape from the Duct bottom Press down firmly on Duct Tighten No 12 Scr...
Страница 2: ...lip locations as shown 2 Check Frame for tight fil If Frame is loose remove the Frame and make necessary adjustments by loosening the Screws re posthoning the Clips and m tightening the Screws attach Frame as above PART NO 4313741 1 Mark center positions or center punch for the pilot holes 4 as shown Dim A is measured from the cut out bottom and Dim B is from the cut out side The top hole is deter...
