Whirlpool IEL730C, Техническое образование

Страница: 39 / 66

COMPONENT ACCESS
Vesta Gas and Electric Slide-In Range
n
3-7
5. Pull the bake burner tube up to expose the wire
connection.
6. Remove the igniter wire.
7. Pull the burner tube out of the oven.
. Remove igniter bracket mounting screws.
9. Remove igniter.
10. During re-assembly make sure the burner tube air
shu er is mounted onto the pressure regulator bake
orifice.
e o ing the con ection an otor
and element assembly
1. This should be easier if the oven door is removed.
2. Remove mounting screws from the convection ba e
cover on the back wall of the oven and remove the cover.
. Pull the convection fan motor mounting bracket into the
oven.
4. Remove the electrical connections to the fan motor.
5. Remove the fan motor and fan blade assembly from the
oven.
Figure 19
Figure 20
Figure 21