background image

EN

User manual

11

INDICATORS

Door locked

This indicator will light up:

•  after you have started a programme

•  the porthole door is locked

Cycle end

This indicator will light up after the programme has ended 

Washing phase 

indicator

This indicator shows the current programme phase, running from left 

to right through wash, rinse, spin and drain . The illuminated indicator 

light shows which phase is in progress .

HINTS AND TIPS

RULES FOR SEPARATING LAUNDRY

•  Fabric type / indications on label (cotton, mixed fibres, 

synthetic, wool, handwash items)

•  Colour (separate coloured garments from whites, wash 

new coloured items separately)

•  Size (wash items of different sizes in the same load to 

improve washing efficacy and weight distribution in the 

drum)

•  Delicates (place small items – such as nylon stockings – 

and garments with clasps – such as braziers – in a laundry 

bag or in a pillow case with a zip) .

WASH SYMBOLS ON GARMENT LABELS

The value given in the tub symbol is the maximum 

temperature possible for washing the garment .

  Normal mechanical action
  Reduced mechanical action
  Much reduced mechanical action
  Hand wash only
  Do not wash

CLEAN THE WATER FILTER REGULARLY

•  This is needed to prevent the filter from blocking and 

preventing the water from draining correctly .

SAVING ENERGY AND PROTECTING THE 

ENVIRONMENT

•  Keeping within the load limits indicated in the 

“PROGRAMM CHART” will optimise energy, water and 

detergent consumption and reduce washing times .

•  Do not exceed the detergent quantities recommended by 

the detergent manufacturer .

•  Save energy by using a 60 °C instead of a 90 °C wash 

programme, or by using a 40 °C instead of a 60 °C wash 

programme . We recommend using “

 

Cotton  ” 

 

the 60 °C programme for cotton garments, which is 

longer, but uses less energy .

•  To save energy and time when washing, select highest 

spin speed available for the programme to reduce the 

residual water remaining in the garments at the end of the 

wash cycle .

•  Pretreat any stains with an appropriate stain remover, 

or else dampen any dried-on stains with water prior 

to washing, as this will reduce the need to use a high 

temperature watch programme .

•  Use the “Colours 15°” programme for lightly soiled 

coloured garments; this will reduce the amount of energy 

used to heat the water .

Содержание FWD91496WSE




















Отзывы: