Refrigerator
®
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
LOCATION REQUIREMENTS
ET8MTKXK
GR2SHKXK
GR2SHTXK
Electrical:
A 115 Volt, 60 Hz., AC only 15 or 20
ampere fused, grounded electrical supply is
required. It is recommended that a separate circuit
serving only your refrigerator be provided. Use an
outlet that cannot be turned off by a switch. Do not
use an extension cord.
Water:
Connect the ice maker to a cold water line
with water pressure between 30 and 120 psi.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. 2225412
07-08-04
1
/
2
" (1.25 cm)
2" (5.08 cm)
To ensure proper ventilation for your refrigerator, allow for 1⁄2 in. (1.25 cm) space
on each side and at the top. (At the top, when using half depth cabinet, use top of
cabinet height "D" dimension. When using full depth cabinet, use overall "E"
dimension.) When installing your refrigerator next to a fixed wall, leave 2 in.
(5.08 cm) minimum on each side (depending on your model) to allow for the door
to swing open. If your refrigerator has an ice maker, allow extra space at the back
for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor
in a location where the temperature will fall below 55°F (13°C).
4
1
E
overall
D
top of
cabinet
C
C
D
top of
cabinet
B
B
not incl.
handle
A
Contour
Model
Standard
Model
E
overall
A
Depth
Cab. Width Door Width Cab. Height Overall Height
Model size
"A"
"B"
"C"
"D"
"E"
STANDARD MODELS
18 cu.ft.
29 3/8"
29 1/2"
29 3/4"
65 1/2"
66 1/4"
CONTOUR MODELS
22 cu.ft.
31 1/2"
32 1/2"
33 1/8"
65 1/2"
66 1/2"
