manualshive.com logo in svg
background image

THIS SERVICE POINTER APPLIES TO THE FOLLOWING BRANDS:

REFRIGERATION PRODUCTS

KITCHEN PRODUCTS

LAUNDRY PRODUCTS

COMMERICAL LAUNDRY

OEM BRANDS

ALL SERVICE POINTERS ONLINE: http://www.servicematters.com/tech_ref/tech_ref_main.htm, SERVICE POINTERS

COMMERCIAL LAUNDRY ONLY: www.whirlpoolcorp.com/cltpsc, TECHNICAL INFORMATION, SERVICE POINTERS

To receive pointers by email or FAX, or to edit or delete a current email or Fax from our distribution, see

http://www.whirlpoolcorp.com/cltpsc/feedback/feedbacksubscribe_all.html, 

or FAX changes to 269-923-5342.

3

3

3

3

3

WHIRLPOOL TALL TUB DISHWASHER

RESOLUTION:

CONDITION:

K8178505

March 2005

Models:

DU1050XTPQ0

DU1101XTPQ0

DU1145XTPQ0

DU1148XTPQ0

DUL240XTPQ0

DUL300XTLB3

DUL300XTLQ3

GU1100XTLB1

GU1100XTLQ1

GU1100XTLS1

GU1100XTLT1

GU1200XTLB3

GU1200XTLQ3

GU1200XTLS3

GU1200XTLT3

GU1500XTLB3

GU1500XTLQ3

GU1500XTLS3

GU1500XTLT3

GU2400XTPQ0

GU2500XTPQ0

GU2548XTPQ0

GU630XTLQ1

GU2548XTPQ0

There is a potential overheating condition in the wash pump motor.  In rare instances, this condition could cause a fire.
The drain pump motor is not affected and can be reused.

Replace the pump-motor assembly with a motor kit #8194160.

See the attached replacement procedure.

Serial Code date: FR22-FR24

WASH MOTOR REWORK #R14165

Part Kits should be ordered through Whirlpool authorized parts suppliers.

3

3

3

3

3

Содержание DU1050XTPQ0







Отзывы: