11
If some of the program lig hts keep flashing very q uickly afte r the warning soun d, that indicates that the
machine is out of order, please note do wn which lights are flashing, turn off the mai n power and wa ter
supply before calling for a service ( see the section entitled
Error co des
).
“
”
If y ou open the door
, the machine will pause. The program light
will stop blinking and the buzzer will sound every minute unless y ou close the door .
After you close the door ,the machine will keep on working after 10 seconds.
during a wash cycle
Premise:
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled.
Press the Start/Pause button and then press the program button for
to put the machine
in a standby state. On in standby state, you can change the program to the desired cycle setting (see the
section entitled " Starting a washing program" ).
more than 3 seconds
The program indicator lights show the state of the dishwasher:
a)
b)
c)
(see the section entitled " Error codes " ).
1
2
3
When you pres s the Start/Pause button to pause during washing, the program light
will stop blinking and the dishwas her will sound every minute unless you press the
Start/Pause button to start.
Starting a cyc le wash
Close the door, press the power button, and the power indicator light will turn on.
Press the program button to select the desired wash program, then press the Start/Pause button
and the dishwasher starts.
Open the door, draw
out the lower and upper basket, load the dishes and push them back.
It is recommended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher
).
Pour in the detergent (see the section entitled
Detergent and Rinse Aid
).
“
”
“
”
Ensure that the dis hwasher i s connected to the p owe r supply, th e water is connected an d
turned on and the drain hose is connected correctly.
1
2
3
4
5
W hen the work ing cycl e ha s fin ishe d, th e bu zze r of th e d ishw ash er w ill so und for 8 se c ond s, t hen stop . Tur n off
th e ap plia nce usin g th e po wer butto n, s hut off th e wa ter supp ly a nd o pen the doo r of t he d ishw ash er.
Wait f or a few minu tes b efo re u nloa ding the dish was h er to a void han dlin g the dish es a nd uten sils while the y
ar e still ho t an d mo re s usce ptib le to bre aka ge. They will also dry bett er.
Switch Off the Dishwasher
1.Switc h off the dish wa s her by p ress ing t he p owe r b u tto n .
2.Turn o ff th e water tap.
Open the door carefully
Hot dishes are s ens itive to k nock s. The d ishe s sh ou ld the refo re b e a llowed to c ool down be fore rem ovin g from
the app lia nc e.
Op en th e d ish was he r's d oor, lea ve it ajar and wai t a fe w m inut es b efor e remov ing t he d ishe s. In th is way the y
will be c oole r an d th e dry ing will be impro ved .
A forgotten dish can be added any time before the detergent dispenser opens.
Add forgotten dishes.
Close the door.
After the spray arms stop working, you can open the
door completely.
2
3
1
4
5
Press the START/PAUSE button.
Press the START/PAUSE button, the dishwasher will run
after 10 seconds.
It is dang erou s to ope n the doo r wh en w ash ing, beca use the hot wate r ma y sc ald you.
Th e se lec ted p rog ram indic ato r is flash ing-->Th e pr og ra m is run ning .
Th e se lec ted p rog ram indic ato r is o n bu t no t fla s hing-->The dish was he r is in stan dby sta te or paus e.
Some of th e pr og ra m li ghts are flas hing mo re qu ickl y-->Erro r
Содержание ADP8000
Страница 1: ...ADP8000 ...
