Whirlpool ADP 6940 WHM, Руководство по обслуживанию

Страница: 2 / 17

S E R V I C E
19.10.2004 / Page 2 ADP 6940 WHM Whirlpool Europe
Doc. No: 4812 728 11564 8542 940 01900 Customer Service
Technical data
Dimension
Height 85.0 cm
±
1.4
Width 59.7 cm
Depth 59.6 cm
Weight 58 kg
Electronic boards
Service boards see spare part list
Serial boards see on the boards itself
UB 4619 724 86781
DB 4619 724 86771
Programing of version and programmed control
board, see „Service“ and „Data set“ on rating
plate of inner door:
CB programmed
724181
Data set 724171
Basic control board, not programmed see on the
board itself
4619 724 81551
Succession of programs
Programs see program diagram
Succession A1a-A2a-A3a-A10a
Datas Energy Label
Reference program A5a
Energy Performance A
Cleaning Performance A
Drying Performance A
Alarms
Refill rinse aid
Refill salt
Options
Zone washing
Delay function
Sani rinse
Program information
Start indicator
Pre wash
Main wash
Drying
End
All programs will be locked after start. Changing
the program or finishing the program will be
possible only after pressing the start button for
longer then 1.5 sec. (Break by customer)
A switching off the appliance or unplug the
appliance for a while, this will frozen the program
step and later on, the program continuos on the
same position.
Exception: Switching off the appliance or unplug
the appliance during the drying phase, this will lead
directly to the end of the program.
Water Volume at alternating spray system
Volume at alternating spray system (same level
when selected zone washing as in the normal
programs)
Water Volume Level
Regeneration 0.3 l 15 mm
Back rinse 3x 1.0 l 60 mm
Prewash 3.9 l 120 mm
Main wash 3.2 l 118 mm
Intermediate rinse 1 3.2 l 118 mm
Intermediate rinse 2 3.2 l 118 mm
Clear rinse 3.2 l 118 mm
Safety/ overflow 8.5 l 141 mm
Measuring the level
Remove the coarse sieve, put in a measuring
meter into the sump, measure the hight of the
water level.
Detergent max.
Pre-wash 10 cm
3
Main-wash 40 cm
3
Rinse aid 135 cm
3
6 Dosage steps 1 - 6 ml
Water softener
Saltcontainer 2 kg
Resin container 700 cm
3
Regeneration dosage 300 cm
3
Water pressure
Inlet pressure 0.3 - 10 bar
Spray pump pressure 0.3 bar
Rotations
Spray pump motor 2800 RPM
Drain pump motor 3000 RPM
Spray arm lower 30 - 40 RPM
Spray arm upper 30 - 40 RPM
Fan for drying 2500 RPM