GB
If a fault occurs, before contacting our After-Sales Service, check the following troubleshooting guide to try
and remedy the problem (*see also the corresponding chapter in the user instructions).
WHAT TO DO IF...
Problem
Cause
Remedy
The appliance is not
working
• No water supply.
• Turn on the water tap.
• The appliance doesn’t fill with
enough water.
• Clean the filter in the water supply
tap.
• Ensure the inlet water hose is not
kinked.
• There is a power failure.
• Insert the plug into the mains
socket.
• Open the door.
• Close the door.
• Check the domestic circuit fuse.
If dishes are not
perfectly dry
• Insufficient rinse aid.
• Increase dispenser setting *.
• Residual water in cavities.
• Load dishes tilted at an angle.
If dishes are not
perfectly clean
• The water spray does not reach the
dishes.
• Arrange dishes so that items do not
touch each other.
Load dishes upside down.
• Insufficient detergent.
• Use the quantity of detergent
recommended by the manufacturer.
• Unsuitable programme selected.
• Select a more intense wash cycle.
• Spray arms blocked.
• The spray arms must be able to turn
freely.
• Spray arm nozzles clogged.
• Remove any particles obstructing
the water flow *.
• Incorrect detergent/detergent too
old.
• Use a good quality detergent.
Sandy or grainy
residues
• Clogged filters.
• Check filters regularly/clean if
necessary *.
• Filters incorrectly installed.
• Refit and lock the filters in place,
making sure they have been inserted
correctly *.
Colour of plastic
parts faded
• Tomato/Carrot juice...
• Depending on the material, if
necessary use a detergent with a
greater whitening power.
NL
F
GB
D
