background image

GB -1-

Chart

PROGRAMS 
SELECTION 
BUTTON
Push “Programs” 
button (repeatedly) 
until the indicator of 
the required 
program lights up 
(see “Table of 
programs” - next 
page).

BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!

HALF LOAD 
BUTTON
Half load cycle can be 
used for the upper or 
lower rack. Select the 
required program 
then press the “Half 
Load” button - the 
light comes on. Turns 
off at the end of the 
program. The “Half 
Load” option can be 
used with the 
programs indicated in 
the table of 
programs.

DELAYED 
START BUTTON
The wash cycle 
can be 
programmed to 
start after 2, 4 or 8 
hours. Then press 
the Start button. 
The wash 
program will start 
after the set time.

START/RESUME 
BUTTON
Push this button to 
start the selected 
program: the indicator 
lights up and goes off at 
the end of the 
program. When the 
door is opened during 
a washing cycle, the 
cycle is temporarily 
paused: the Start 
indicator blinks.
To resume the cycle 
push  Start button and 
close the door within 3 
seconds.

SALT 
INDICATOR
When lit (at the 
end of the 
cycle), the salt 
reservoir needs 
to be refilled.

RINSE AID 
INDICATOR
When lit (at the 
end of the 
cycle), the rinse 
aid dispenser 
needs to be 
refilled.

5019 396 01914

ADG 130

TABLET SETTING
This setting allows to 
optimize the cycle 
performances according 
the type of detergent 
used. Push the Tablet 
button for 3 seconds 
(until the indicator lights 
up) if you are using the 
combined detergents in 
tablet (rinse aid, salt and 
deteregent in 1 dose). If 
you are using powder 
detergent or liquid 
detergent, the Tablet 
indicator on the control 
panel has to be off.

THE CONTROL PANEL OF THIS DISHWASHER ACTIVATES PUSHING ANY BUTTON EXCEPT CANCEL/OFF BUTTON.

FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.

CANCEL/OFF 
BUTTON

Push this button to switch 
off the control panel.
If pressed when a 
program is running it 
cancels the program 
ongoing draining water 
for 1 minute.
If pressed when the 
dishwasher is switched 
off it drains any possible 
liquids from dishwasher 
(1 minute process).
If the indicator flashes 
repeatedly, see page 9 - 
chapter ”What to do if ...”.

Quick reference guide

Содержание ADG 130













Отзывы: