Section III: Control System
Schematic Diagram
1.
The Compressor:
Compressor downtime must be greater than 5 minutes to open again. It is parked at an open cycle, once the freezer
reaches the required temperature, only then will the compressor stop again.
2.
Condenser Fan Motor:
When the ambient temperature is below 10
℃
, condenser fan is turned on ten minutes after the compressor is turned on.
When the ambient temperature is higher than 10
℃
, condenser fan and compressor are simultaneously turned on.
3.
Evaporator Fan Motor:
Evaporator fan is turned on after the freezer door is closed.
4.
Freezer & Ref LED Lamps:
The freezer & ref lamps turn off when the freezer door is closed, and turned on when the freezer door is opened.
5.
Heater and Air Damper:
During cooling/refrigeration mode, air damper is opened.
During defrost mode, air damper is closed and heater is turned on.
Air Damper only changes its state when freezer door is closed.
Содержание 7S21FNI SL
Страница 7: ......