31
MESSAGES ON THE DISPLAY
Code
Presented
On the display
Description of probable
causes solution
F0E2
Excess detergent, lower the dosage.
Amount of detergent above
the recommended amount
for the product.
Use the recommended for each
type of input (page 15).
• Powder detergent: Do not
exceed the indicated on the
measuring cup or 32 g of
the input, suitable for very
dirty clothes and maximum
washing capacity..
• Liquid detergent: Use a
maximum of 40 ml or
2 tablespoons of liquid
detergent.
F0E4
Door locked, wait for the temperature
to low.
Internal temperature of the
product is high, the door is
locked for your safety.
Wait a few moments for
the door to unlock after the
temperature lows.
F0E5
Unstable load, adjust clothes in the
basket.
The load of clothes is
not well distributed in
the basket, causing an
imbalance.
Distribute the clothes evenly in
the basket.
F1E6
Incorrect voltage, check socket.
Your Washer/Dryer is
connected in a socket
that is not suitable for its
operation.
Check if the socket voltage is
compatible with the voltage of
your Washer/Dryer.
U4, F5E1 or F5E2
Door is open. Please close the door.
Your Washer/Dryer door
is open or not closed
properly.
Make sure your Washer/Dryer
door is completely closed.
F8E1
There is no water, check the tap.
Water shortage.
Make sure water is coming out
of the tap.
F9E1
No water comes out, check the outlet
hose.
• Water outlet hose is
installed above 1.20 m.
• Folded water outlet
hose.
• Air inside the water
drainage system.
• Review the installation
information (page 8) and
reinstall considering the
appropriate hose height.
• Clear the hose.
• Clean the Buttons Catch
Compartment, as instructed
on page 17.
No code
Transport screws detected.
The transport screws have
not been removed.
Remove the transport screws as
shown on page 6.
F0E3, F1E2 to
F1E5, F3E1 to
F3E5, F4E1 to
F4E6, F5E1,
F5E3, F5E4,
F6E1 to F6E3,
F7E1 to F7E9,
F8E1 and F8E3
Contact technical support.
Technical failure.
Enter the code when contacting
technical support.
Your Washer/Dryer can display code messages on the display. Some codes indicate conditions of use that are not necessarily failures.
See table below. If the code still persists, check how to contact us at point 5 of the Warranty Certificate. Codes not described in the
table below indicate product failure. In this case, check how to contact us at point 5 of the Warranty Certificate.
Содержание 7MWFC5090KC
Страница 4: ...4 ...
Страница 5: ...5 ...
Страница 40: ...W11479674A 2020 All rights reserved 08 20 ...