Whirlpool 2195258, Инструкция по использованию и уходу

Страница: 32 / 78

30
PART
Plastic parts
(covers and
panels)
Defrost pan
(behind
refrigerator
on top of motor)
Condenser
coils
WHAT TO USE
Soft, clean sponge
or soft, clean cloth
with mild detergent
and warm water
Sponge or cloth
with mild detergent
and warm water
Vacuum cleaner
with extended
narrow
attachment
HOW TO CLEAN
•
Wipe, and dry thoroughly.
Do not use paper towels, window sprays,
scouring cleansers, or flammable fluids.
These can scratch or damage material.
See “Important Safety Instructions” on
page 3.
•
Remove base grille. (See page 22.)
• Reach into small opening at right edge and
remove the defrost pan.
•
Wash, rinse, and dry thoroughly.
•
Replace defrost pan. Make sure to push it
completely into the opening.
•
Replace base grille. (See page 23.)
•
Remove base grille. (See page 22.)
•
Vacuum coils when dusty or dirty. Coils
may need to be cleaned as often as every
other month.
•
Replace base grille. (See page 23.)
Holiday and moving care
Short holidays
No need to shut off the refrigerator if you will
be away for less than four weeks.
1. Use up any perishables.
2. Freeze other items.
Long holidays
If you will be gone a month or more:
1. Remove all food from the refrigerator.
2. If your refrigerator has an automatic
ice maker:
• Turn off the water supply to the ice
maker at least one day ahead of time.
•
When the last load of ice drops, turn off
the ice maker. Make sure all ice is dis-
pensed out of the ice maker mechanism.
3. Unplug the refrigerator.
4. Clean it, rinse well, and dry.
5. Tape rubber or wood blocks to the tops of
both doors to prop them open far enough
for air to get in. This stops odor and mold
from building up.
To restart refrigerator, see “Using Your
Refrigerator” on page 9.
Moving
When you are moving the refrigerator to a
new home:
1. If your refrigerator has an automatic
ice maker:
• Turn off the water supply to the ice
maker at least one day ahead of time.
•
Disconnect the water line.
• After the last load of ice drops, lift the
signal arm to the OFF (up) position.
2. Remove all food from the refrigerator.
3. Pack all frozen food in dry ice.
4. Unplug the refrigerator.
5. Clean it thoroughly. Rinse well and dry.
6. Take out all removable parts, wrap them
well, and tape them together so they don’t
shift and rattle.
7. Screw in the leveling rollers.
8. Tape the doors shut and tape the power
supply cord to the cabinet.
When you get to your new home, put
everything back and refer to page 6. Also,
remember to reconnect the water supply line.