Denar
®
Simplified Occlusal
Plane Analyzer
(SOPA)
Instructions for Use
SteP Seven
When an acceptable level for the back of the
occlusal plane has been established, draw a
line on the cast from cuspid point backward
(Figure 6).
SteP eIght
Repeat for the opposite side.
For further instructions on the preparation
line, occlusal plane cutting guide and occlusal
reduction, refer to “Evaluation, Diagnosis,
and Treatment of Occlusal Problems” by
Peter E. Dawson, D.D.S., C.V. Mosby, 1989;
pgs. 379-381.
FN 8212-F AD R0708
Whip Mix Corporation - West
1730 East Prospect Rd., Suite 101
Fort Collins, CO 80525
Toll-Free: 1-800-201-7286
Fax: 1-970-472-1793
www.whipmix.com
©2008 Whip Mix Corporation
Whip Mix
®
, Denar
®
and logos are registered
trademarks of Whip Mix Corporation.
Made in U.S.A.
Figure 6
