WHILL F страница 20 Скачать руководство пользователя

Страница: 20 / 120

WHILL Model F User Manual

2. About the device

Back support

Arm rest

Controller

Power button
Turns on/off the device.

Display
Speed select button “+”

Increases the speed.

Speed select button “-”

Decreases the speed.

Joystick

Controls the forward, backward, left, and right
movements.
The degree of joystick inclination can also
control acceleration and deceleration.

Horn button

Turns on/off the sound.

Speaker

Lock release button

Releases the lock when folding or unfolding the
device.

Foot rest

Supports the user’s feet when the user is seated in
the device.

Front wheels

Arm

Brake release lever

Used to lock/unlock the brakes for the rear wheels.
This lever is located under the seat assembly.
There are two levers in total.

Battery

For details, refer to “4.1. Battery and charger
components” on page 58.

Anti-tip roller

This prevents the device from tipping over
backwards.

Foot pedal

Secures the device when folding or unfolding the
device.

Rear wheels

Hand rest

Charger

Used to charge the battery.
For details, refer to “4.1. Battery and charger
components” on page 58.

Содержание F

























































































































Результаты поиска

Содержание F

Отзывы:

Похожие инструкции для F

Бренды по названию

Популярные бренды

WHILL F, Руководство пользователя

Результаты поиска

Содержание F

Отзывы:

Похожие инструкции для F

Бренды по названию

Популярные бренды