WHILL C2 Скачать руководство пользователя страница 37

Страница: 37 / 114

WHILL Model C2/Ci2 User Manual

4.2. Getting in the device

Read this manual to understand the contents before using the device.
Pay attention to the following when getting in.

WARNING

Turn off the device power when getting in and out of the device.

There is a risk of unexpected movement of the device caused by accidental contact with the
control pad.

Ensure that the brakes are locked before getting in the device. Do not leave the device while the
brakes are released.

If the brakes are released, there is a risk that the device may start moving and tip over

If your body is not stable in the seat of the device, ensure you use the lap belt (if equipped).

There is a risk of falling out of the device. If the device you are using does not have a lap belt,
contact your distributor.

The maximum load weight for this device is 300 lb (approx. 136 kg). It includes both the
occupant and any luggage. Use the device without subjecting it to a load higher than this limit.

There is a risk of damaging the device.

When using your own cushion, for safety, be sure to use one that has sufficient flame-
retardancy.

Do not apply your weight to the control pad or accessory bar.

There is a risk that these components may become disconnected, rendering the device
inoperable.

Do not jump onto the foot rest, stand on the foot rest while carrying a heavy object, or place an
excessive load on the foot rest.

There is a risk of the device lifting up and tipping.

Содержание C2



















































































































Результаты поиска

Содержание C2

Отзывы:

Похожие инструкции для C2

Бренды по названию

Популярные бренды

WHILL C2, Руководство пользователя

Результаты поиска

Содержание C2

Отзывы:

Похожие инструкции для C2

Бренды по названию

Популярные бренды