Whalen Belmont 2-in-1 Work Station Скачать руководство пользователя страница 1

 

THIS INSTRUCTION BOOKLET CONTAINS 

IMPORTANT

 SAFETY INFORMATION.  

PLEASE READ AND KEEP FOR FUTURE REFERENCE. 

Whalen Furniture Mfg., Inc.   

 

 

     Page 1 

 

 

       

     Factory No. 16015 

                                             
 
 
 

 

 

 

Belmont 2-in-1 Work Station 
Model # JCS101104-C 

 
 
 
 
 
 
 
 
 

 
 

 

 
                                           

 

 

 

 

 
 
 
 
 
 
 
 
 

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP 
POINTS, SHARP EDGES AS RECEIVED 

 

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the 
store where it was purchased. Please call our toll-free customer service number and have your 
instructions and parts list ready to provide the model name, part name or factory number: 

 

1-866-942-5362 

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday 

Or visit our web site 24 hours a day, 7 days a week for product assistance at 

www.whalenfurniture.com

 

Or e-mail your request to 

[email protected] 

 
 

LOT NUMBER:       

 

 

DATE PURCHASED:    /    /  

Содержание Belmont 2-in-1 Work Station





















Отзывы: