WEY Technology AG
· MAN22771_E06.docx · 18.04.2018
Dorfstrasse 57 · 8103 Unterengstringen · Schweiz · T +41 44 751 89 89 · [email protected] · www.weytec.com
6
1.1.3
Parts and Service
NOTICE
Risk of property damage
All WEY products and their attached units may only be opened and repaired by qualified and authorized
service personnel.
For fiber optic equipment only personnel familiar with the handling and general safety guidelines for
optical equipment are entitled to repair such devices.
1.1.4
Environmental conditions and protection against electric shock
WARNING
Risk of electric shock or explosion
Do not place WEY Products and their peripheral equipment near heat generating devices or
humidifiers.
Do not expose WEY Products to constant sunlight or wetness.
Do not use Wey Products in rooms containing easily inflammable, ethereal or volatile gas.
Avoid environmental hazards such as dust, dirt, food, liquids, chemicals, temperature extremes,
vibrations and abrupt changes in humidity or temperature.
In case of condensation on or within the units, allow sufficient time for the moisture to evaporate.
Do not use artificial means to speed up the drying process.
Before using the equipment again, verify that all connected units are thoroughly dry.
1.1.5
Disposal of Old Electrical and Electronic Equipment
NOTICE
Risk of negative consequences for the environment
The recycling of materials helps to conserve natural resources.
This symbol on WEY products indicates that this product shall not be treated as household waste.
Instead it should be handed over to the applicable collection point for the recycling of electrical and
electronic equipment.
By ensuring this product is disposed of correctly, you help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling.
