Wexxar WF-10T, Руководство по эксплуатации и обслуживанию

Страница: 41 / 156

WF-10T Case Former Controls
5-29
Figure 5-23: 'Setup' Screen
5.5
DRY CYCLE Mode
For the purposes of troubleshooting, machine operators may choose
to operate the machine without any cases loaded. This function is
called
‘DRY CYCLE’
, and is available in either
JOG
or
AUTOMATIC
CYCLE
modes.
Touching the
‘DRY CYCLE ON/OFF’
toggle switch in the left center
of the
‘Setup’
screen turns the
DRY CYCLE
feature
ON
. The button
will turn green read
DRY CYCLE ON
when the machine is operating
in
DRY CYCLE
mode. When the machine has been put into
DRY
CYCLE
operation, an indicator also appears at the bottom of the
screen displaying the text
‘DRY CYCLE ACTIVE’
. To exit
DRY
CYCLE
operation, press the
‘DRY CYCLE ON/OFF’
button. The
button will now read
‘DRY CYCLE OFF’
.
When the machine is in
DRY CYCLE
operation, a small indicator
appears at the bottom of the screen displaying the text
‘DRY CYCLE
ACTIVE’.
To exit
DRY CYCLE
operation, press the
‘DRY CYCLE
ON’
button so that the button displays the text
‘DRY CYCLE OFF’
.
Figure 5-26: DRY CYCLE Function
17) ‘Setup’ Screen
The
‘Setup’
screen
provides access to the
many features related
to machine diagnostics
and tuning.
Figure 5-24: DRY CYCLE
OFF/ON Toggle Switch
Figure 5-25: DRY CYCLE
ACTIVE Indicator