Wexxar WF-10T, Руководство по эксплуатации и обслуживанию

Страница: 39 / 156

WF-10T Case Former Controls
5-27
When the selection of box size is changed, the title on the
‘LARGE
BOX/SMALL BOX’
button on the
‘Main Control’
screen will
change to match the new box size.
11) ‘BOX SETUP JOGGING OFF/ON’ Button
Touch the
‘BOX SETUP JOGGING OFF/ON’
button when jogging
is required to adjust the machine box size settings. When this
button is touched, it will turn green to indicate that the machine is
in
BOX SETUP JOGGING
mode.
NOTE: Because of the need for careful testing and precise
box Dimension M (box height) adjustment, the BOX SETUP
JOG process has one more step in it than the regular
MACHINE JOG process. The ‘BOX SETUP JOG’ should
always be used when setting up for a new box size.
Touch the
‘JOG CONTROL’
button in the lower left-hand corner of
the screen or the
‘PREVIOUS’
button in the lower right-hand
corner of the screen to exit the
‘Box Setup’
screen.
12) ‘JOG CONTROL’ Button
This button, located to the bottom left of the
‘Main Control’
screen
when the machine is stopped. This button will take the machine
into
JOG
mode from
CYCLE
mode. The button disappears when
the machine is running.
JOG
mode lets the operator move through the machine cycle one
step at a time. This mode is useful in troubleshooting. Pushing
the
‘JOG CONTROL’
button displays the
‘Jog Control’
screen.
Figure 5-13: Changing the Box Size Figure 5-14: SMALL BOX Selected
Figure 5-15: 'Box Setup
Jogging On' Button
Figure 5-16:
'Previous' Button
Figure 5-17: 'JOG
CONTROL' Button