Glass
tilt
Rev. 2.0 (202202)
Safety instructions
7
2.5
Operation
Be very careful around the machine when it is in operation.
2.5.1
High temperatures
•
The temperature of the washing and rinsing water is 60°C and 65 -85°C.
Do not open the machine until the washing and rinsing phases have
finished. The steam that comes out of the machine after the wash has been
completed is hot.
•
Avoid touching hot pipes and booster heaters. The machine’s outer jacket
can also become hot during operation.
2.5.2
Risk of crushing
The machine, and any equipment, has moving parts before, during and after
washing. Be careful therefore to avoid crushing injuries. In connection with
service or repairs that require the hood to be open, it must be secured by means
of a prop for example.
2.5.3
Risk of slipping
The floor should be kept clean and dry to eliminate any risk of slipping. Mop up
any water and leftover food that has been spilt.
2.5.4
Sounds
The machine is not silent during operation, see TECHNICAL SPECIFICATIONS.
Hearing protection may therefore need to be used.
2.6
Cleaning the machine
The water in the tank has a temperature of approximately 60°C and contains
detergent. Be careful when draining and cleaning the wash tank. Wear protective
gloves and safety glasses and have an eyebath within easy access.
Содержание WD-6
Страница 2: ......
Страница 34: ...Glasstilt Rev 2 0 202202 Operating instructions 30 4 1 Before washing 4 1 1 Machine design ...