Wexiodisk WD-215T Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 51

Wexiodisk WD-215T Скачать руководство пользователя страница 21

WD-215T

Rev. 6.0 (201812)

Installation instructions

18

4. Start the machine:

•

Check the direction of rotation of the pumps

NB

! If the direction of rotation is wrong, the phase must be inverted on the

incoming feed

•

Check the function of the overload switch for the feed

5. Run a number of washes complete with loads and check:

•

There are no water leaks

•

The door breaker works

•

Steam discharge from the machine

•

The tank and final rinse temperatures are maintained

•

The final rinse flow has been set correctly
(2.5 l/min. (factory setting))

•

The washed items are clean

•

The washed items are dried

6. Final check: Empty the machine and turn off the power using the main
switch.

•

Re-tighten all the connections on the relays and circuit breakers

•

Check that all the mini-switches and the motor cut-off switch are in the on
position.

•

Display the maintenance instructions supplied with the machine

7. Train the dishwashing personnel

•

Washing

•

Care (daily, weekly and other frequencies)

•

Recommendation for annual service

3.7

Documentation

For correct use and servicing, it is essential that the documentation accompany-
ing the machine is made available to personnel who will be using the machine.
The installation and user manual, which describes handling and care among
other things, should be stored near the machine.

«
...
19
20
21
22
23
...
»

Содержание WD-215T




















































Отзывы:

Нет отзывов