Wexiodisk WD-11 страница 50 Скачать руководство пользователя

Страница: 50 / 59

WD-11

Rev. 5.0 (202206)

Operating instructions

Cleaning each week or as required

Weekly cleaning should be more thorough than daily cleaning. In addition to the
daily cleaning measures, clean the machine as per these instructions:

•

Clean the washer arms (16). Brush and rinse the washer arms using the
Cleaning brush (WD721.0301) and clean the nozzles.

•

Check and clean the rinse nozzles (13).

•

Remove and clean the doors (15). Open the door, depress the catch (14)
and lift the door vertically.

•

Refit all cleaned components.

•

Decalcify the machine when necessary.

Cleaning brush WD721.0301

The door springs may be cleaned as required by rinsing these from the side. Use
our Cleaning Gun (WD240.9009) for best results. The springs must NOT be re-
moved! The door in front of the spring being cleaned must be closed.

Содержание WD-11




























































Результаты поиска

Содержание WD-11

Отзывы:

Похожие инструкции для WD-11

Бренды по названию

Популярные бренды

Wexiodisk WD-11, Инструкция по установке и эксплуатации

Результаты поиска

Содержание WD-11

Отзывы:

Похожие инструкции для WD-11

Бренды по названию

Популярные бренды