Wexiodisk WD-11, Инструкция по установке и эксплуатации

Страница: 37 / 59

WD-11 Rev. 5.0 (202206)
Operating instructions
33
Setting the start time, date
It is possible to set the start time for specific dates, either for an individual date or
for a period between a start date and an end date. It is possible to set the timer
for a date up to two years from the current date.
This is what you should do to set the start time and which dates it should apply to:
Hold down the MODE button for 3 seconds in order to enter settings mode.
•
Press MODE again.
P down to the left flashes
• Press the SET button.
The message YEAR and P down to the left
flashes
If there are no previously stored start time settings, the points below must be followed. If start time settings
are stored, the timer moves on directly to the next step (set start date):
•
Change with the buttons
▲
and
▼
so that
PULSE is indicated instead of ON/OFF.
• Press SET.
The message ON/OFF flashes
Set the start date (adjustable value flashes):
•
Change the flashing value with the buttons
▲
and .
• Scroll to the next value with the button
►
.
• When all the values (year, month and day)
are set, press SET.
P
STEP
PULSE
90-9-05-008
P
STEP
90-9-05-012
P
STEP
90-9-05-013
P
PULSE
90-9-05-014