WeWALK SMARTCANE, Руководство пользователя

Страница: 6 / 20

ULTRASONIC SENSOR
Your WeWALK uses an ultrasonic system to detect obstacles. Do not press on the
ultrasonic sensor positioned at the front of the handle or try to manipulate it in any way.
Any damage to this sensor may cause the product to perform poorly.
TACTILE BUTTONS
When WeWALK is switched on and obstacles are detected, the two buttons will vibrate.
It is important that you do not press hard on the buttons as this will reduce the vibration
intensity. You should experiment with positioning your hands to get maximum sensitivity.
The wearing of thick gloves is not recommended as this will also reduce the intensity of
vibration feedback.
SPEAKER AND MICROPHONE
WeWALK has a speaker and microphone for audio feedback and voice commands.
POWER BUTTON
Use the power button to turn the WeWALK on or off.
TOUCHPAD
The touchpad works by sensing your finger movements and pressure. The touchpad
is used to control the connected WeWALK smartphone app. Usage with gloves is not
recommended as this may decrease the performance of the touchpad.
More information on gestures can be found in a separate section. To see other supported
gestures and their functionalities, check support.wewalk.io or the tutorial tab on the
WeWALK smartphone app.
FRONT LED
The front LED is used to improve your visibility to others in the dark and can be enabled
or disabled as required. Additionally, the LED can be used as a visual reference to show
that WeWALK is turned on.
MICRO USB INPUT
The micro USB input is used to charge the battery of your WeWALK device.