22
Measuring Examples
added. To add the width, press the key
. The width of 64 mm will
now be added to the sum and you can read the total result on the
display. To stop measuring and to freeze the value, press the button
(10) and the result (e.g. 6.000 m) flashes on the display.
For example, to detect 3 measuring points (intermediate points), press
the button
(5) three times and on the display “-- of 3 POINTS“ is
displayed. After that, press the button
(10). Roll the distance back
until you reach the position display (A), the value does not flash and
until you hear a signal sound. On the point display (G) “1 of 3 POINTS“,
e. g. measuring point 1 of 3 measuring point is reached and the display
“POINTS“ (B) flashes. Draw with a pencil a line on the left side or mark
with the marker button (3) the measuring point at 4.500 m.
You will reach the other measuring points at 3 and 1.5 meter by rolling
the device back. The point display (G) shows the resp. reached
measuring point “2 of 3 POINTS“ (measuring point 2 from 3 measuring
point) and “3 of 3 POINTS“ (measuring point 3 of 3 measuring points).
Hints:
Due to the length of the distance, it is not possible to divide small
distance in exactly 10 intermediate part-distances.
If the distance is below 5 cm, an intermediate point is not possible. At a
distance of 6 cm only one intermediate point is possible. The longer the
distance is the more intermediate points are possible (max. 10
intermediate points = 11 part-distances).
At a distance of 28 cm 10 intermediate points are possible.
