23
About the Accessories
Helmet Mounting Clip (sold separately)
Attach the HMD to a commercially available helmet. The HMD can be attached to
any helmet in principle, however, it may not be able to be attached to certain helmets
depending on the shape.
1
Attach the clips to the left, right, and back of the helmet.
If the helmet does not have a groove, adhere an embossed sheet (sold separately) to the hel-
met. Stick the sheet so that it is sandwiched between the helmet and the clip.
Case without groove
Helmet
Clip
Hook-and-loop fastener
Strap hole
Helmet
Emboss sheet
Case with groove
2
Wrap the mounting clip and the HMD using a hook-and-loop fastener to fix it.
Use the strap hole to prevent slippage.
MEMO
After mounting, check that the clips and hook-and-loop fasteners are not loose.
Содержание InfoLinker3
Страница 2: ......
