-8-
-9-
NOTE:
The Tomato Strainer cannot be used with meat products.
1. Cut large fruits and vegetables into quarters and small fruits and vegetables in half.
IMPORTANT:
Remove pits, stems, hard shells and hard seeds before placing
fruits or vegetables into the
Tomato Strainer
to avoid damaging the
Screen.
2. Be sure the
Power Switch
is in the off “O” position. Connect the power cord for the
Tomato Strainer
to the power source.
3. Place the fruits/vegetables in the
Hopper
. Do not overfill the
Hopper
.
DO NOT
operate the
Tomato Strainer
without the
Hopper
in place.
4. Place a bowl under the
Chute
to collect juice and pulp. Place a bowl under the
Screen
outlet to collect skin and seeds (figure 9).
5. Turn the
Power Switch
to the on “-” position.
6. Feed the fruits/vegetables into the
Head
. Use the
Stomper
to push the fruits/
vegetables into the
Head
.
ALWAYS
us the
Stomper
to push food into the
Head/
Hopper
,
NEVER
use hands or fingers.
HELPFUL HINTS:
A.
Rerun the skin and seeds through the
Tomato Strainer
to extract any
leftover pulp & juice. Repeat as necessary.
B.
Use a rubber spatula to scrape pulp from the
Screen
into the
Chute
.
7. When straining is complete, turn the
Motor
o the off “O” position and disconnect it
from the power source.
INSTRUCTIONS FOR USE
Figure 9
Stomper
Bowl to collect the
skins and seeds
Bowl to collect the
juice and pulp
The
“R” Reverse Toggle
is used primarily for clearing jams. In event of a jam;
• Turn the
Power Switch
to the off “O” position. Allow the
Motor
to come to a
COMPLETE STOP before toggling the
“R” Reverse Toggle
to clear a jam.
• Allow the
Motor
to come to a COMPLETE STOP before turning the
Power Switch
to the on “-” position after using the reverse function.
• NEVER operate the
Motor
in reverse for more than 5 seconds at a time.
If the jam does not clear, disconnect the
Tomato Strainer
from the power source and
follow the
“Disassembly & Cleaning Instructions”
to clean the unit.
REVERSE FUNCTION
