-3-
1. Insert the
Blade Assembly
into the
lower housing, guiding the drive shaft into
the journals. Make sure the gears and the
blades of the
Blade Assembly
are properly
meshed together and resting in the journals
(Figure A).
NOTE:
The
Tenderizer Blade
is a 2-piece set. The
Jerky Slicer Blade
is
a single piece.
Sold Separately
2. Position the top housing onto the lower
housing
and line up the screw holes.
3. Secure the top housing to the lower
housing using the 2 housing thumbscrews.
DO NOT OVERTIGHTEN!
(Figure B).
4. Insert the
left comb and right comb into
the top housing
(Figure B).
NOTE:
The
left comb is marked with an “L”
on the upper portion of the comb. The top
housing is marked with an “L comb” and “R
comb” to aid in comb installation.
5. Install handle onto the
Blade Drive
Shaft
. Secure the
Handle
to
Drive Shaft
with the
Handle Thumbscrew
(Figure C).
Figure A
Blade
Assembly
Drive Shaft
Lower
Housing
Top
Housing
Journals
Journals
Figure B
Housing
Thumbscrews (2)
Figure C
Handle
Handle
Thumbscrew
Drive Shaft
ASSEMBLY INSTRUCTIONS
Gears
NOTE:
Periodically the gears on the
Blades
need to be tightened. Use the
allen wrench to tighten the screw on the
gears.
Gears
Jerky blades and
Cuber/Tenderizer Blades
sold separately
