Confirm Modem is Online
Wait until 2 lights are solid blue.
This may take up to 10 minutes.
3
4
Connecting Your GigaSpire BLAST Wi-Fi Router
Plug in the power adapter shipped with the
GigaSpire to an available wall socket and attach
the other end to the GigaSpire’s power port.
Connect one end of the supplied Ethernet cable to
the Yellow LAN Port 1 on the back of the Arris
CM9200 internet modem and the other end of the
cable to the WAN port on the back of the GigaSpire.
Once the light is solid green (or blue), and you are able to see the
WCG-***** SSID with your Wi-Fi devices, initial setup is complete.
Note: The SSID (network name) of your
new GigaSpire will update from CXNK-
******* to WCG-******** when the system
has updated. The password remains the
default setting; as found on the bottom
of your GigaSpire
beside ‘WPA Key’
.
