1
1
SAFARI BAR ASSEMBLY (PURCHASED SEPARATELY)
2,3
2
BRACKET, PASSENGER (2) AND DRIVER (3)
4
2
1/2-13 X 2.00” HEX HEAD BOLT
5
2
1/2” FLAT WASHER
6
2
1/2” LOCK WASHER
QTY
CONTENTS - CONTENIDO - CONTENU
TOOLS - HERRAMIENTA
- OUTILS
ITEM
AUTOMOTIVE PRODUCTS, INC.
75-0840 REVISION 7/18/07
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
SAFARI BAR ASSEMBLY
BARRA PARA PARRILLA SAFARI
MONTAGE DE LA BARRE PARE-
CHOCS SAFARI
30-0000 30-0005
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
30-1415
1
1
BARRA PARA PARRILLA SAFARI (SE COMPRA SEPARADO)
2,3
2
SOPORTE, ACOMPAÑANTE (2) Y EL CONDUCTOR (3)
4
2
PERNOS CON CABEZA HEXAGONAL DE 1/2-13 X 2,00”
5
2
ARANDELAS PLANAS SAE DE 1/2”
6
2
ARANDELAS DE PRESIÓN DE 1/2”
1
1
2,3
2
(2)
(3)
2
6
2
MONTAGE DE LA BARRE PARE-CHOCS SAFARI (ACHETE SEPAREMENT)
SUPPORTS, PASSAGER
ET CONDUCTEUR
4
BOULON A TETE HEXAGONALE DE 1/2-13 X 2,00 PO
5
2
RONDELLE PLATE 1/2 PO
RONDELLE A FREIM DE 1/2 PO
DOUILLE 3/4” PO
CLE 3/4 PO
DOUILLE 15MM
CLE 15MM
PERCEUSE
MECHE
SCIE CLOCHE DE 2,50 POUCES
WO:
1
2
3
STEP 1.
Remove the contents from box and check for damage. Verify all parts are present. Read instructions
completely before beginning.
STEP 2
.
Determine passenger and driver brackets.
STEP 3.
Remove factory 10mm bumper support bolts. Attach brackets to vehicle using factory 10mm bumper
bolts.
SEE FIGURE 1.
STEP 4.
Using a silver marker or light colored paint pen, mark the center hole location on the backside of the
airdam.
SEE FIGURE 2.
STEP 5.
Remove brackets. Drill through the backside of the airdam where marked using a small drill bit. Drill
thought the front side using a 2.50” hole saw. Reattach brackets with factory 10mm bumper bolts.
STEP 6.
Attach Safari Bar to brackets using 1/2-13 x 2.00” hex head bolt, 1/2” flat washer and lock washer as
shown.
SEE FIGURE 3
.
STEP 7.
Level and adjust Safari Bar as desired and tighten all fasteners. Recommended torque values are 31 Ft.
Lbs. for 10mm bolts and 43 Ft. Lbs. for 1/2” fasteners.
APPLICATION: 2008 BUICK ENCLAVE/2007-08 GMC ACADIA/2007-08 SATURN OUTLOOK
APLICACIÓN:
, MOD. 2007-2008
2008 BUICK ENCLAVE/2007-08 GMC ACADIA/SATURN OUTLOOK
APPLICATION: 2008 BUICK ENCLAVE/2007-08 GMC ACADIA/SATURN OUTLOOK 2007-2008
FINISH PROTECTION
Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive
wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish
and open it to corrosion.
3/4” SOCKET
3/4” WRENCH
15MM SOCKET
15MM WRENCH
DRILL
DRILL BIT
2.50” HOLE SAW
MARKING PEN
RATCHET
TORQUE WRENCH
MARCADOR
MANERAL
LLAVE DE TORQUE
DADO DE 3/4”
LLAVE DE TUERCAS DE 3/4”
DADO DE 15MM
LLAVE DE TUERCAS DE 15MM
TALADRO
BROCA
SIERRA PERFORADORA DE
2,5”
STYLO MARQUEUR
CLIQUET
CLE DE COUPLE
