QTY
CONTENTS -
CONTENIDO
- CONTENU
TOOLS -
HERRAMIENTAS
- OUTILS
APPLICATION:
1999-08 FORD F-250/350/450/550HD SUPERDUTY SUPER AND CREW CAB
ITEM
APLICACIÓN:
FORD F-250/350/450/550HD SUPERDUTY SUPER CAB Y DOBLE CABINA, MOD.
1999-08
APPLICATION:
1999-08 FORD F-250/350/450/550HD SUPERDUTY CABINE SUPER ET DOUBLE
AUTOMOTIVE PRODUCTS, INC.
75-0505 REVISION G 10/19/07
2
3
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
STEP BAR ASSEMBLIES
ENSAMBLES DE ESTRIBOS
ENSEMBLES DE MARCHE-PIEDS
25-1310
25-1315
26-1310
25-1330
25-1335
26-1330
1
2
STEP BAR, PASSENGER AND DRIVER
4
4
1/2-13 X 1.75” HEX HEAD BOLT
5
4
1/2” FLAT WASHER
6
4
1/2” LOCK WASHER
7
12
5/16-18 X 1.25” HEX HEAD BOLT
8
20
5/16” FLAT WASHER
9
12
5/16” LOCK WASHER
10
8
5/16-18 HEX NUT
11
4
5/16-18 CLIP NUT
2
2
FRONT DRIVER/REAR PASSENGER BRACKET
3
2
FRONT PASSENGER/REAR DRIVER BRACKET
1
2
4
4
PERNOS CON CABEZA HEXAGONAL DE 1/2 -13 x 1,75”
5
4
ARANDELAS PLANAS DE 1/2”
6
4
ARANDELAS DE PRESIÓN DE 1/2”
7
12
PERNOS HEXAGONALES DE 5/16 -18 x 1,25”
8
20
ARANDELAS PLANAS DE 5/16”
9
12
ARANDELAS DE PRESIÓN DE 5/16”
10
8
TUERCAS HEXAGONALES DE 5/16 -18
11
4
ABRAZADERAS DE 5/16 - 18
2
2
SOPORTES DELANTEROS
/ TRASEROS
3
2
SOPORTES DELANTEROS
/ TRASEROS
ESTRIBOS, ACOMPAÑANTE Y EL CONDUCTOR
CONDUCTOR
ACOMPAÑANTE
ACOMPAÑANTE
CONDUCTOR
3/4” SOCKET
1/2” SOCKET
TORQUE WRENCH
RATCHET
1/2” WRENCH
DADO DE 3/4”
DADO DE 1/2”
LLAVE DE TUERCAS DE 1/2”
LLAVE DE TORQUE
MANERAL
DOUILLE 3/4”
DOUILLE 1/2”
CLEF 1/2”
CLEF DE COUPLE
CLIQUET
1
2
2
2
SUPPORTS AVANT
ARRIÈRE
3
2
SUPPORTS AVANT
ARRIÈRE
4
4
1/2 -13 x 1,75 PO BOULON A TETE HEXAGONALE
5
4
1/2 PORONDELLE PLATE
6
4
1/2 po RONDELLE A FREIN
7
12
5/16-18 X 1,25 PO BOULON A TETE HEXAGONALE
8
20
5/16 PO RONDELLE PLATE
9
12
5/16 PO RONDELLE A FREIN
10
8
5/16-18 ÉCROU HEXAGONAL
11
4
5/16-18 COLLIER A ECROU
MARCHE-PIEDS, PASSAGER ET
PASSAGER
PASSAGER
CONDUCTEUR
CONDUCTEUR /
/
CONDUCTEUR
STEP 1.
Remove contents from box and check for damage. Verify all parts are present. Read instructions completely
before beginning.
Attach step bar to brackets using 1/2” fasteners as shown. Make sure step bar and brackets are properly
aligned and tighten fasteners. Recommended torque values are 64 FT.LBS. for 1/2”fasteners and 16 FT.LBS.
for 5/16” fasteners.
STEP 4.
STEP 2.
STEP 3.
Insert nut clips into rocker panel as shown.
Install front and rear brackets using 5/16” fasteners as shown. Hand tighten.
SEE FIGURES 1 AND 2.
SEE FIGURES 3 AND 4.
SEE FIGURE 5.
WO:
2
1
