13
Operation
Before first Use
Remove the packaging material from the air hose reel and check it for
damage in transit. Do not leave packaging materials in the range of
children, they may become dangerous toys.
Mounting
Attach the wall holder (4) to a suitable load-bearing wall, post or similar
location with suitable mounting hardware and use the hinge pin to
connect the reel to the wall holder. The wall holder does not have a
defined top or bottom, but it should be mounted as vertical as possible
because otherwise the hose reel will hang to one side.
Choose a location that is free of electrical wiring or other obstructions,
and make sure that the fixing surface is sturdy enough to hold the hose
reel.
It is advised to fix the hose reel at least 1 m away from the floor.
Intended Use
The wall-mountable air hose reel is designed to keep the air hose
organized and stored safely and neatly. It can be mounted on the wall or
ceiling and is able to be swivelled 180 degrees.
Operating
1. Connect the connection hose (5) to compressed air supply.
2. Grip the ball stopper (1) and pull the hose (2) out. Slowly unroll the
hose to the required length. The hose is guided by a guiding
mechanism during unwinding and retraction and locks in place by
means of a ratchet mechanism and remains in the selected length.
3. To lock the hose, pull the hose and stop at your desired locking
position. There are 2
– 3 locking positions per meter of the hose.
4. Use the quick coupler (3) to connect the air tool with the air hose.
5. Disconnect the air tool after work from the air hose. Briefly pull the hose
after finishing work until you do not hear the clicking sound of the
ratchet. The hose will automatically be retracted. Firmly hold the end of
the hose with your hand and let it retract slowly.
